Manager Forum

As promised, we've made an interim update available here: http://m1faqs.com/fix/SE/version/Manage ... .2.113.exe
It contains a few minor fixes, but functions primarily to update the YMM list. Clicking the link above will trigger the downloading of the SE 8.2.2 release.

Please note this as an interim release this is not the customary automatic notify shops delivery and requires users to actively seek it out and download to install. All of this DMV model data will be included in the full SE 8.3 release that will be distributed to all users in our usual fashion.

Is there a README available for the minor fixes?

If you click on What's New In This Release from the home splash screen, it's been updated with SE 8.2.2 details.

Thank you, Thank you, Thank you for this update!!

For some reason the link will not work for me

I use chrome and it would not allow it to work. I tried edge and it worked.

GUTHTIRE wrote: ↑

Fri Mar 26, 2021 3:40 am

Is there a README available for the minor fixes?

• Vehicle YMM list updated
  Message Center updated to highlight the most recent message

Fixed

• Location Column will now display on PO Worksheet for all intended catalogs
  Late Fee Assessment will no longer continue to prompt when dismissed
  Status Mapping will not prevent access to appointment editor
  Program Security for Part Kit editing has been fixed
  Batch Payments – On Account payments will now correctly show in History

sbebenelli wrote: ↑

Fri Mar 26, 2021 8:33 am

I use chrome and it would not allow it to work. I tried edge and it worked.

Odd. You've used manual updates from the site before I assume. Do you recall having this trouble in the past?

Silky7 wrote: ↑

Fri Mar 26, 2021 8:52 am

sbebenelli wrote: ↑

Fri Mar 26, 2021 8:33 am

I use chrome and it would not allow it to work. I tried edge and it worked.

Odd. You've used manual updates from the site before I assume. Do you recall having this trouble in the past?

Yes it has always worked. I just tried it again and when I click on link it does nothing. When I copy link and paste it into address bar the page will not open. This is when using chrome.

I can access that link using Chrome. I get a warning from my virus software regarding executables, but I can and did get the file. Perhaps your security software is blocking?

ricmorin wrote: ↑

Fri Mar 26, 2021 9:55 am

I can access that link using Chrome. I get a warning from my virus software regarding executables, but I can and did get the file. Perhaps your security software is blocking?

That must be it. No big deal I got it updated regardless.

timbre4 wrote: ↑

Fri Mar 26, 2021 6:14 am

If you click on What's New In This Release from the home splash screen, it's been updated with SE 8.2.2 details.

Yes, but this is after you apply the update, correct?

Correct. The short update list was also copied here a few posts prior to this one.

Silky7 wrote: ↑

Fri Mar 26, 2021 8:49 am

• Message Center updated to highlight the most recent message

This was a much needed update. Thank you!

For some reason, I can not apply the update. The link works, it lets me do the initial download, then it says it can not find the specified file. This has been happening for the past several updates and I have to call tech support to have them install the update manually. Not sure why that is happening.

DynaBMan wrote: ↑

Wed Mar 31, 2021 3:56 am

For some reason, I can not apply the update. The link works, it lets me do the initial download, then it says it can not find the specified file. This has been happening for the past several updates and I have to call tech support to have them install the update manually. Not sure why that is happening.

Thanks for reporting this. I actually saw the same issue, but no one else could reproduce it. I think it has something to do with longstanding temp files on machines that have been doing manual updates for long time, but didn't have the opportunity to confirm that.

Silky7 wrote: ↑

Wed Mar 31, 2021 8:04 am

DynaBMan wrote: ↑

Wed Mar 31, 2021 3:56 am

For some reason, I can not apply the update. The link works, it lets me do the initial download, then it says it can not find the specified file. This has been happening for the past several updates and I have to call tech support to have them install the update manually. Not sure why that is happening.

Thanks for reporting this. I actually saw the same issue, but no one else could reproduce it. I think it has something to do with longstanding temp files on machines that have been doing manual updates for long time, but didn't have the opportunity to confirm that.

Is there anything I can do to fix the issue? Or is it strictly a support issue?

Not that I've found yet, Larry. I'll let you know if I do.

Silky7 wrote: ↑

Wed Mar 31, 2021 12:15 pm

Not that I've found yet, Larry. I'll let you know if I do.

Thanks, Dan. I will call support when I get the free time.

Just a fare warning for those running Quickbooks Integrator.. We had this update done last Friday and it broke our integrator and rendered however it was previously syncing incompatible. We were told to contact "Back Office", whoever that is, to get some Accounting Link software installed. Did that, but they can't install until this coming Friday, which we're closed, which puts it at next Thursday. No bueno. We're dead in the water in the accounting department until then. No mention at the time of upgrading Teamworks of "oh, by the way, it's going to kill your Quickbooks integrator." Now we're dealing with a huge mess and the owner is some kind of livid.

Silky, if you're out there, can you help??